Product Page: DSR-1000N
Firmware Version: 0.01
Hardware Version: A1
DSR-1000N
Device StatusLogout
Page Sub-Heading
Description...
 
General
System Name: D-Link_DSR1000
Firmware Version: 0.01
 
WAN1 Information
MAC Address: 00:00:00:00:00:02
IPv4 Address: 192.168.10.25 / 255.255.255.0
IPv6 Address:
Wan State: UP
NAT (IPv4 only): Enabled
IPv4 Connection Type: STATIC
IPv6 Connection Type: IPv6 is disabled
IPv4 Connection State: Connected
IPv6 Connection State: IPv6 is disabled
Link State: LINK DOWN
WAN Mode: Use only single WAN port: Dedicated WAN
Gateway: 192.168.10.10
Primary DNS: 192.168.10.1
Secondary DNS: 192.168.10.2
 
WAN2 Information
MAC Address: 00:00:00:00:00:03
Connection Type: Dynamic IP (DHCP)
Connection State: Not Yet Available
Wan State: DOWN
WAN Mode: Use only single WAN port: Dedicated WAN
NAT: Enabled
IP Address: 0.0.0.0 / 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
 
LAN Information
MAC Address: 00:00:00:00:00:01
IP Address: 192.168.1.39 / 255.255.255.0
IPv6 Address:
DHCP Server: Disabled
DHCP Relay: Disabled
DHCPv6 Server: IPv6 is disabled
 
Wireless LAN
Operating Frequency:
Mode:
Channel:
 
Available Access Points
SSID:
Security:
Encryption:
Authentication:
Helpful Hints...
Help content goes here...
Copyright © 2010 D-Link Systems, Inc.